Features
| - PLC touchscreen control and foot pedal operation
- Winding methods: prismatic cell and cylindrical cell winding switchable
- Positioning of electrode slot with adjustable postion and wdith
- Adjustable tension, winding speed, and winding cycles
- High winding alignment accuracy
- Manual loading and unloading of electrode sheets, automatic winding
- Settable separator tension control
- Small footprint for laboratory use
|
| Input Power | - Single-phase, 220 VAC, 50/60Hz (110 VAC is available upon request)
- 1 kW power
|
Cylindrical Winding
 
| - Winding round needle size: 3.5 mm OD
|
|
- Electrode alignment accuracy: ≤ ± 0.5 mm edge roughness
- Separator alignment accuracy: ≤ ± 0.5 mm edge roughness
|
Prismatic Winding
  | - Select one of four winding square needle sizes:
- Size 2030: 158mm L x 20-30mm W adjustable x 6mm Thickness
- Size 3040: 158mm L x 30-40mm W adjustable x 6mm Thickness
- Size 4060: 158mm L x 40-60mm W adjustable x 6mm Thickness
- Size 6080: 158mm L x 60-80mm W adjustable x 6mm Thickness
|
- Electrode winding size:
- Length: 30–100 mm (not including electrode tab)
- Width: 30-90 mm
- Thickness: 10 mm Max.
|
- Electrode alignment accuracy: ≤ ± 0.5 mm edge roughness
- Separator alignment accuracy: ≤ ± 0.5 mm edge roughness
|
- Supporting plate size: 780mm L x 120mm W, other customized sizes are available upon request.
|
|
| Guiding Roller Width | |
| Core of Separator Roll | |
| Diameter of Separator Roll | |
| Tension | |
| Winding Speed | |
Compressed Air
 
pic1 pic2 | - Compressed air of 0.5-0.8 MPa is needed for the operation of this machine.
- Please note the air compressor is not included. Please click the picture on the left to order one at MTI, or order it from your local hardware store.
- Attention: If a gas cylinder is used instead of an air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator
|
Cathode / Anode Feeding
| - Loading material: cathode/anode sheets, such as aluminum foil coated with LiFePO4 or LiCoO2, NMC (cathode), and copper foil coated with graphite (anode)
- Length range: 300 - 1300 mm
- Width range: 30 – 100 mm
|
| Separator Feeding | - Loading material: separator film rolls, such as polyethylene (PE) or polypropylene (PP)
- Length range: separator roll with a diameter < 250 mm
- Width range: <110 mm
- Tension range: 0 – 10 N for both top and bottom separator films
|
Tape Dispenser
| - An automatic tape dispenser is included for strapping the finished electrode core with tapes
- 220 VAC 50 / 60 Hz, 160 W
- Cutting length range: 13 – 60 mm adjustable
- Tape width range: 3 – 25 mm adjustable
- Tape roll size: 25, 32, 75 mm ID, up to 130 mm OD
- The tape dispenser manual is available for download here
|
| Optional | |
| Size |   - 1260 mm L x 807 mm W x 1185 mm H
|
| Net Weight | |
| Warranty | - One-year limited warranty with lifetime support
- Rusting or damage due to improper storage conditions or maintenance is not covered by warranty
|
Compliance
| - CE Certified
- NRTL or CSA Certification is available upon request at extra cost
|
| Operation Instruction & Video |   |
| Application Notes | - Place the machine on a flat surface free of vibration to avoid tipping of the machine
- Do not change the factory settings of air cylinders without consulting MTI. Beware not to change the air cylinder settings by accident.
- Take extra caution when operating the cutter and motor to avoid possible physical injury! Do not touch the cutter with your hand! Do not put a hand close to the cutter while the equipment is operating! Do not let hands, hair, or clothes get caught in the rolling - clamping - winding assembly! Put up warning signs, and warn other people to stay clear of the equipment.
|
