Power / AC Converter | - Input Voltage: 208- 240VAC Three Phase, 50/60Hz
- 5.5KW Three Phase Motor ( 7.5 horsepower )
|
Rollers | - Roller materials: Hardening Cr12MoV
- Roller size: 132 mm dia. x 180 mm width (~ 5" Dia x 7" width )
- Hardness: HRC 60-62
- Rolling thickness: 0.02 - 20 mm adjustable
- Gap accuracy: +/- 0.05 mm
- Min. thickness is dependent on the materials. The below is based on our experience:
- Ag: 0.06 mm
- Au: 0.04 mm
- Sn: 0.02 mm
- Cu: 0.06 mm
|
Rolling Speed
| - 0 - 8 mm / second adjustable via Frequency control with constant output power.
- The speed control unit is in separate box
|
Overall Dimensions | 1020 mm(L) x 730 mm (W) x 1400 mm (H) |
Net Weight | |
Shipping Weight & Dimensions | |
Compliance
| - CE Certified
- NRTL certification is available upon request at the extra cost.
|
Warranty | - One year limited warranty and lifetime technical support
- Rust and damage to the two rollers due to improper storage condition or maintenance are not covered by warranty
|
Operation Video & Instructions |
|
Application Note
| - Never roll materials with hardness > 50HRC
- The thickness of each time pressing is depending on material thickness. The harder material shall be less press thickness, which customers shall test by themselves for the best parameters
- For some material that is easy work hardening, you may need to anneal it by furnace after each rolling.
|